Filter
Top Products
03/12/17 XL-MP150E 29-44.fm
30
XL-MP150E
Advanced Features
Listening to sound from a USB-connected PC
System requirements
Connect a PC to the USB port. You can play audio data stored on
the PC through the supplied speakers.
The following hardware are required for USB connection:
Notes:
Installing a driver
If this is your first time connecting to a PC, follow the on-screen
instructions to install a driver (included with the OS). Once installed,
you do not need to repeat the procedure.
For installation, refer to the operation manual for the PC.
PC
IBM PC/AT compatible Apple Macintosh computer
OS
Windows 98 Second Edition Mac OS X
Windows 2000 Professional
Windows Millennium Edition
Windows XP Home Edition
Windows XP Professional
USB
Available USB port (USB 1.1)
CPU
MMX Pentium processor (266 MHz or higher) or equivalent
Sharp does not guarantee proper operation on all computers.
You cannot operate the unit on a PC, and vice versa.
IBM and PC/AT are registered trademarks of international
Business Machines Corporation in the United States.
Macintosh is a registered trademark of Apple Computer, Inc. in
the United States and/or other countries.
MMX and Pentium are trademarks or registered trademarks of
Intel Corporation.
Microsoft and Windows are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
The names of other systems and products in this manual are
trademarks or registered trademarks of the corresponding compa-
nies. Symbols
TM
and ® are omitted.
PC Equaliser and volume must be set to suitable level otherwise
may cause distortion sound.
1
Turn on a PC to boot the OS.
2
Press the ON/STAND-BY button on the main unit to turn
the power on.
3
Press the VIDEO/AUX/USB button repeatedly to select
“USB”.
4
Connect the unit to the PC with a USB cable.
To the USB socket
To the USB port
PC
USB connection cable
(Supplied)