Sharp XL-MP150 Stereo System User Manual


 
6
XL-MP150
General Information
Precautions
General
z Please ensure that the equipment is positioned in a well-ventilated
area and ensure that there is at least 4" (10 cm) of free space
along the sides, top and back of the equipment.
z Do not place anything on top of the unit.
z Do not expose the unit to moisture, to temperatures higher than
140
˚F (60˚C) or to extremely low temperatures.
z If your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and then
turn on your system.
z This unit should only be used within the range of 41
˚F - 95˚F (5˚C
- 35˚C).
Warning:
The voltage used must be the same as that specified on this unit. Us-
ing this product with a higher voltage other than that which is speci-
fied is dangerous and may result in a fire or other type of accident
causing damage. SHARP will not be held responsible for any dam-
age resulting from use of this unit with a voltage other than that which
is specified.
Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid ex-
posure to high volume levels, which occurs while turning the unit on
with the volume control setting up high, or while continually listening
at high volumes.
z Use the unit on a firm, level surface free from
vibration.
z Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
z In case of an electrical storm, unplug the
unit for safety.
MICRO COMPONENT SYSTEM
XL-MP150
CD
POWER/
4" (10 cm)4" (10 cm)
4" (10 cm)
4" (10 cm)
/
MICR
O
C
O
M
PO
N
EN
T
S
Y
S
TE
M
X
L
-
M
P
1
5
0
P
O
W
E
R
/
C
D
z Hold the AC power plug by the head when
removing it from the AC outlet, as pulling
the cord can damage internal wires.
z Do not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.