41
XL-MP150
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Amplifier
CD player
Tuner
Cassette deck
Speaker
Power source AC 120 V, 60 Hz
Power
consumption
96 W
Dimensions Width: 7-1/4" (185 mm)
Height: 10-1/4" (260 mm)
Depth: 12" (307 mm)
Weight 13.9 lbs. (6.3 kg)
Output power 110 watts minimum RMS per channel into 6
ohms from 100 Hz to 20 kHz, 10% total har-
monic distortion
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals Video/Auxiliary (audio signal):
500 mV/47 k ohms
Type 5-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Frequency
response
50 - 14,000 Hz (normal tape)
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.3 % (WRMS)
Type 2-way type light-up speaker system
2" (5 cm) tweeter
5-1/8" (13 cm) woofer
Maximum input
power
220 W
Rated input power 110 W
Impedance 6 ohms
Dimensions Width: 7-1/4" (185 mm)
Height: 10-1/4" (260 mm)
Depth: 10-1/4" (260 mm)
Weight 6.8 lbs. (3.1/ kg/each)