Filter
Top Products
E-12
EN
Listening to a CD or MP3/WMA disc
■ Disc playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
3 Press the OPEN/CLOSE button to open the disc compart-
ment.
4 Place the disc in the disc compartment, label side front.
5 Press the OPEN/CLOSE button to close the disc tray.
6 Press the / (CD/USB / ) button to start playback.
To stop playback:
● Press the
(CD/USB ) button.
Caution:
● Do not place two discs in one-disc-tray.
● Do not play discs of special shapes (heart, octagon,
etc). It may cause malfunctions.
● Do not push the disc tray while it is moving.
● If the power fails wait until the power is restored.
● If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
● Be sure to place 8 cm (3”) disc in the middle of the
disc tray.
● Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
Note for CD or MP3/WMA disc:
● Rewritable multi-session discs with unnished writing,
can still be played.
■ Various disc functions
Function Main
unit
Remote
control
Operation
Play
Press in the stop mode.
Pause
Press in the playback
mode. Press the
/ button to resume
playback from the
paused point.
Stop
Press in the playback
mode.
Track
up/down
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start
the desired track.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
■ Direct track search
Use the Numeric buttons (remote control) to select the
desired track while playing the selected disc.
● The Numeric buttons allow you to select up to number 9.
● When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
Selected track number
B. For example, to choose 130
1 Press the “10+” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
Notes:
● A track number higher than the number of tracks on
the disc cannot be selected.
● During random play, direct search is not possible.
■ Random play
To random play all tracks:
Press RANDOM button on the remote control until “Random”
appears. Press the
/ (CD/USB / ) button.
To cancel random play:
Press the RANDOM button again. “RDM” indicator will dis-
appear.
Notes:
● If you press the
button during random play, you
can move to the track selected next by the random
operation. However, the button does not allow you
to move to the previous track. The beginning of the
track being played will be located.
● In random play, the unit will select and play tracks auto-
matically. (You cannot select the order of the tracks.)