Filter
Top Products
E-9
Listening to USB mass storage
device/MP3 player
Note:
This product is not compatible with MTP and AAC fi le
systems from USB mass storage device or MP3 player.
Procedure to playback MP3/WMA disc Q
with folder mode on
To play back CD-R/RW.
Press the CD button, and load an MP3/WMA disc. Press 1
the FOLDER button and disc info will be displayed.
Press the FOLDER button, and press the PRESET ( 2 or )
button to select desired playback folder. (Folder mode on)
MP3 indicator
WMA indicator
TOTAL indicator
Total number of folder
Total number of fi les
FOLDER
indicator
FOLDER number
First track number in
the folder
Select desired fi le to be played back by pressing the 3 or
button.
Press the
4 (CD/USB ) button. Playback will start and
fi le name will be displayed.
Title, Artist and Album name are displayed if they are O
recorded on the disc.
In case of playback with the folder mode on, press O
the PRESET (
or ) button, and the folder can be
selected even though it is in playback/pause mode. It
will continue playback/pause mode in the 1st track of the
selected folder.
Display content can be changed by pressing the O
DISPLAY button.
File name display
Title display
Album display Artist display
Note:
If “NO SUPPORT” is displayed, it means “Copyright protected
WMA fi le” or “Not supported playback fi le” is selected.
Programed play (MP3/WMA) Q
While in the stop mode, press the MEMORY button to 1
enter the programing save mode.
Press the PRESET ( 2 or ) button on the remote
control to select the desired folder.
Then press the or button on the remote control
to select the desired tracks.
Press the MEMORY button to save the folder and track 3
Press the MEMORY button to save the track number.3
Repeat steps 2 - 3 for other tracks. Up to 32 tracks 4
can be programed. If you want to check the programed
tracks, press the MEMORY button repeatedly. If you
make a mistake, the programed tracks can be cleared
by pressing the CLEAR button.
Press the
5 (CD/USB ) button to start playback.
number.
Repeat steps 2 - 3 for other folder/tracks. Up to 32
4
tracks can be programed.
Press the
5 (CD/USB ) button to start playback.
To cancel the programed play mode:
During programed stop mode, press the
(CD/USB )
button. The display will show “MEM CLEAR” and all the
programed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the “MEMORY”
indicator will be displayed. Press the MEMORY button
repeatedly to go to the last program memory. Then follow
steps 2 - 3 to add tracks. The new tracks will be stored after
the last track of the previous program.
Notes:
When a disc is ejected, the program is automatically O
canceled.
If you press the ON/STAND-BY button to enter the stand- O
by mode or change the function from CD to another, the
programed selections will be cleared.
During the program operation, random play is not possible. O
Advanced CD or MP3/WMA disc
playback (continued)
Disc
Name
XL-DH229P_USA_EN.indd 9XL-DH229P_USA_EN.indd 9 12/28/2010 3:23:55 PM12/28/2010 3:23:55 PM