Filter
Top Products
04/1/28 XL-DAB10N 20H_001 EN.fm
E-9
9
8
7
6
5
4
3
2
1
9
Listening to a CD or MP3/WMA disc
This system can play back a standard CD, CD-R/RW in the
CD format and CD-R/RW with MP3 or WMA files, but
cannot record on them. Some audio CD-R and CD-RW
discs may not be playable due to the state of the disc or the
device that was used for recording.
MP3:
MP3 is a form of compression. It is an acronym which
stands for MPEG Audio Layer 3. MP3 is a type of audio
code which is processed by significant compression
from the original audio source with very little loss in
sound quality.
● This system supports MPEG 1 Layer 3 and VBR files.
● During VBR file playback, time counter in the display
may differ from its actual playback time.
● Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that
include audio files which are compressed with
Windows Media Audio codec. WMA is developed by
Microsoft as an audio format file for Windows Media
Player.
● “MP3” and “WMA” indicator will light up after the unit
reads information on an MP3 or WMA disc.
● Bitrate which is supported by WMA is 64 ~ 160 kbps.
Caution:
● Do not place two discs in one disc tray.
● Do not play discs of special shapes (heart, octagon,
etc). It may cause malfunctions.
● Do not push the disc tray whilst it is moving.
● If the power fails whilst the tray is open, wait until the
power is restored.
● If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
● Be sure to place 8 cm (3") disc in the middle of the disc
tray.
● Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
Notes for CD or MP3/WMA disc:
● When the end of the last track is reached during fast
forward, the CD operation will be stopped. When the
beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
● Rewritable multi-session discs with unfinished writing,
can still be played.
XL-DAB10
■ Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2 Press the CD button on the remote control or
FUNCTION button on the main unit repeatedly to select
CD function.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
5 Press the OPEN/CLOSE button to close the disc tray.
6 Press the / button to start playback. After the last
track is played, the unit will stop automatically.
■ Various disc functions
Function Main
unit
Remote
control
Operation
Pause Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Track up/
down
____
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start
the desired track.
Fast
forward/
reverse
____ Press and hold down in
the playback mode.
Release the button to
resume playback.
XL-DAB10