Filter
Top Products
22
XL-E80
Tape Recording
Recording on a cassette tape
Before recording:
"
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
"
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
"
The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
" For recording, use only normal tapes. Do not use metal or
CrO tapes.
"
Do not use C-120 tapes or poor-quality tapes, as they may cause
malfunctions.
! Recording from a CD or MP3 disc
Erase-prevention tab of cassette tapes:
" When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent acciden-
tal recording or erasing.
" To protect the recorded sound, re-
move the tab after recording. Cover
the tab hole with adhesive tape to
record on the tape without the tab.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button until "CD" appears on the dis-
play.
When operating with the remote control, press the CD button.
3 Load the desired disc.
4 Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
5 Press the TAPE ( ) button.
Recording will be paused.
6 Press the ( ) button to start
recording.
" Playback of the disc will start in a few seconds after the tape
starts.
"
When the playback is finished, the disc and the cassette will
stop automatically.
Side A
Tab for
side B
Tab for
side A