Filter
Top Products
11
XL-E80
Preparation for Use
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
"
Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
" Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
"
Do not stand or sit on the speakers. You may be injured.
"
Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
"
Do not let the bare speaker wires touch each other.
Placing the speaker system:
There is no distinction between the right and the left speakers.
! Connecting the AC power cord
After checking all the connections have been made correctly, con-
nect the AC power cord to the AC power input jack, then plug the AC
power cord of this unit into the AC outlet.
Notes:
" Unplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.
" Never use a power cord other than the one supplied. Otherwise,
a malfunction or an accident may occur.
! To turn the power on
Incorrect
Speaker grilles are removable:
Make sure nothing comes into contact with the
speaker diaphragm when you remove the
speaker grilles.
Press the ON/STAND-BY button to
turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
AC outlet
(AC 120 V, 60 Hz)