Filter
Top Products
31
SD-EX220
03/6/19
SD-EX220(U).fm
TINSE0560AWZZ
References
- Specifications -
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Amplifier
CD player
Tuner
Speaker
Power source AC 120 V, 60 Hz
Power consumption 67 W
Dimensions Width: 15" (380 mm)
Height: 7-7/8" (200 mm)
Depth: 4-3/4" (120 mm)
Weight 8.2 lbs. (3.7 kg)
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Optical digital output
Subwoofer pre-out (audio signal): 200 mV/10 k ohms at
70 Hz
Input terminals Auxiliary input: 500 mV/47 k ohms
Amplification system 64fs 1-bit switching (Remarks: fs = 44.1 kHz)
Power output 80 watts minimum RMS per channel into 4 ohms from
40 Hz to 20 kHz, 2 % total harmonic distortion
A/D noise shaping 7th-order (delta - sigma) modulation
Type 1-disc vertical type compact disc player
Signal readout Non-contact, 3-beam semiconductor laser pickup
D/A converter 24-bit/96 k D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 101 dB (1 kHz)
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1.720 kHz
Type 2-way type speaker system
13/16" (2 cm) Tweeter
4-3/4" (12 cm) Woofer
Maximum input power 160 W
Rated input power 80 W
Impedance 4 ohms
Dimensions Width: 10-11/16" (270 mm)
Height: 7-7/8" (200 mm)
Depth: 4-15/16" (124 mm)
Weight 5.1 lbs. (2.3 kg)/each
6