Filter
Top Products
34
HT-X1
DVD Operation
Useful operation (continued)
" To change the audio language (audio output)
During playback, you can change the audio language (audio out-
put).
Notes:
!
The audio language on some DVDs may not be changed.
!
For audio language and audio system, refer to the manual of the
disc.
!
When you set the unit to the stand-by mode or replace the disc,
settings return to the default.
" To brighten an image
To restore the original brightness:
In step 1, select "OFF".
1
While a disc is playing, press
the SHIFT button and then the
AUDIO button.
Audio language information
2
Repeat step 1 to select the desired audio number.
When playing DVD, the language changes as follows:
When playing audio CD and MP3, the sound changes as fol-
lows:
Audio 1/3: AC-3 5.1 English
1: Original <English>
(Dolby Digital 5.1
ch
Surround)
2: English
(Dolby Digital 2 ch Surround)
Audio 1/3: AC-3 5.1 English
Audio 2/3: AC-3 2CH English
Mono Left
Mono Right
Stereo
1
During playback, press the
SHIFT button and then the GAM-
MA button to select "ON".
"ON" and "OFF" will be switched by each press of these but-
tons.
2
Within 10 seconds, press the
cursor ( or ) button to set the
level.
Level Setting Level Setting
OFF Normal image ON Brighter
ON Slightly brighter ON A lot brighter
OFF
G
ON
G