Sharp MD-MX30 Stereo System User Manual


 
40
External care
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dirty cloth.
Do not use chemically treated cleaning cloths or other
chemicals.
MAINTENANCE
SPECIFICATIONS
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of produc-
tion units. There may be some deviations from these values in individual units.
General
Power source: AC 120 V, 60 Hz
Power
consumption: 73W
Dimensions: Width; 8-1/2" (215 mm)
Height; 6-7/16" (162 mm)
Depth; 13-1/2" (342 mm)
Weight: 10.4 Ibs. (4.7 kg)
Amplifier section
Output power: FTC 20 watts per channel minimum
RMS into 6 ohms from 60 Hz to 20 kHz
with no more than 10 % total harmonic
distortion
Output terminals: Speaker; 6 ohms
Headphones; 16 - 50 ohms
(recommended 32 ohms)
Input terminals: Auxiliary; 500 mV/47 k ohms
MiniDisc recorder section
Type: MiniDisc recorder
Signal readout: Non-contact, 3-beam semiconductor
laser pickup
Rotation speed: 400 - 900 rpm CLV, Approx.
Error correction: ACIRC (Advanced Cross Interleave
Reed-Solomon Code)
Quantization: 20-bit linear (A/D converter)
Coding: ATRAC (Adaptive Transform Acoustic
Coding)
Sampling
frequency: 44.1 kHz
Recording
method: Magnetic modulation
overwrite method
Frequency
response: 20 - 20,000 Hz
D/A converter: 1-bit D/A converter
Wow and flutter: Unmeasurable
(less than 0.001% W. peak)
Signal/noise ratio: 95 dB (1 kHz)
Dynamic range: 90 dB (1 kHz)
Audio channel: Stereo; 2 channels
Monaural; 1 channel (playback only)
(long-time recording mode)
Compact disc player section
Type: Drawer type compact disc player
Signal readout: Non-contact, 3-beam semiconductor
laser pickup
Rotation speed: 200 - 500 rpm CLV, Approx.
Error correction: CIRC (Cross Interleave Reed-Solomon
Code)
Quantization: 16-bit linear
Frequency
response: 20 - 20,000 Hz
D/A converter: 1-bit D/A converter
Signal/noise ratio: 95 dB (1 kHz)
Dynamic range: 90 dB (1 kHz)
Wow and flutter: Unmeasurable
(less than 0.001% W. peak)
Tuner section
Frequency range: FM; 87.5 - 108.0 MHz
AM; 530 - 1,720 kHz
Sensitivity: FM; 2.5 µV (75 ohms unbalanced)
AM; 650 µV/m
Speaker section
Type: 2-way speaker system
[4-3/4" (12 cm) woofer and
3/4" (2 cm) tweeter]
Maximum input
power: 50 W
Rated input
power: 25 W
Impedance: 6 ohms
Dimensions: Width; 6-5/16" (160 mm)
Height; 11-1/16" (280 mm)
Depth; 9-1/4" (233.5 mm)
Weight: 7.1 Ibs. (3.2 kg)/each
Internal care
In order to ensure proper operation of the CD player, pre-
ventative maintenance (cleaning of the laser pick-up lens)
should be performed periodically in order to keep the lens
dust-free. Lens cleaners are commercially available. Con-
tact your local CD software dealer for options.