Sharp QT-CD180 Stereo System User Manual


 
6
Listening to a CD
5 Press the PLAY/PAUSE
0 60 6
0 60 6
0 6 button to start playback from track 1.
To interrupt playback:
Press the PLAY/PAUSE 0 6 button during playback.
Press the PLAY/PAUSE 0 6 button again to resume playback.
To stop playback:
Press the STOP button.
To listen to the track being played again:
During playback, press the REVIEW/DOWN 5 button.
To move to the beginning of the next track:
During playback, press the CUE/UP 4 button.
Notes:
To skip a number of tracks at one time, press the REVIEW/DOWN 5 or
CUE/UP 4 button repeatedly until the desired track number is shown.
To start playing a desired track, press the REVIEW/DOWN 5 or CUE/
UP 4 button while in the stop mode to select the track number, and
then press the PLAY/PAUSE 06 button.
To fast forward audibly (Cue):
During playback, hold down the CUE/UP 4 button.
To fast reverse audibly (Review):
During playback, hold down the REVIEW/DOWN 5 button.
Notes:
When the end of the disc is reached while cueing, “En” will appear in the
display and CD operation is paused. Press the REVIEW/DOWN 5 but-
ton for fast reverse or press the STOP button to stop CD operation.
If the beginning of the disc is reached while reviewing, the mode will au-
tomatically switch to normal playback at that point.
1 Set the FUNCTION switch to CD.
2 Open the CD compartment.
3 Place a compact disc on the spindle, label side up.
3" (8 cm) discs may be played without an adaptor.
4 Close the CD compartment.
Precautions:
When “Cd” or track number is displayed, the power is connected.
If you will not be using the CD player, set the FUNCTION switch to OFF.
Do not open the CD compartment while the disc is rotating.
If the disc is damaged, dirty, or loaded upside down, the total number
of tracks will not appear. Clean, replace, or reload the disc properly.
Keep foreign objects out of the CD compartment.
Subjecting the unit to shock or vibration may cause mistracking.
Keep the CD compartment closed except when loading discs.
Playing certain compact discs at a high volume may cause mistracking.
In this case, listen at a lower volume.
If TV or radio interference occurs during CD operation, move the unit
away from the TV or radio.