Sharp QT-CD180 Stereo System User Manual


 
2
Do not use oil, solvents, gasoline, paint thinners or insecticides on
the unit.
Do not expose the unit to moisture, to temperatures higher than 140°F
(60°C) or to extreme low temperatures.
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home comput-
ers, facsimiles, etc.) which generates electri-
cal noise.
Hold the AC power plug by the head when re-
moving it from the AC outlet, as pulling the
cord can damage internal wires.
When cleaning the heads, pinch roller, etc.,
remove the AC power plug from the AC outlet
as the unit contains high voltages.
Do not remove the outer cover, as this may result in electric shock.
Refer internal service to your local SHARP service facility.
Use the unit on a firm, level surface free from vibration, and do not
place anything on the top of the unit.
If the unit does not work properly, set the FUNCTION switch to OFF
and then to ON again.
In case of an electrical storm, unplug the unit
for safety.
This unit should only be used within the range
of 41°F - 95°F (5° C - 35°C).
Warning:
The voltage used must be the same as that specified on this unit. Using
this product with a higher voltage other than which is specified is dan-
gerous and may result in a fire or other type of accident causing dam-
age. SHARP will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is specified.
Warning:
CD players use a laser pickup which can damage the eyes if viewed
directly. Do not look at the pickup, and do not touch the pickup directly.
Special Notes Precautions
Caution - use of controls or adjustments or performance of proce-
dures other than those specified herein may result in hazardous ra-
diation exposure.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.