Sharp MD-SR50H MiniDisc Player User Manual


 
98
Preparation
Inserting a MiniDisc
1 Slide the OPEN lever to release the com-
partment door.
2 Lift it up.
3 Insert a MiniDisc by pressing the middle
of the edge of the disc.
4 Close the compartment door.
2
1
3
4
Notes:
Do not place the MiniDisc under the holder.
If any resistance is felt, do not force the MiniDisc into the
unit, as it may cause damage to the unit. If resistance is
felt, remove the MiniDisc and reload it.
To prevent recordings from being lost, the MiniDisc can-
not be removed until the TOC has been written (“TOC”
or “TOC EDIT ! ” is displayed ). Press the • /:OFF
button to update the TOC and turn the power off, the
MiniDisc can now be removed.
Refer to the instructions on page 12.
Check that the erase-protection
tab is in the recordable position.