Sharp MD-SR50H MiniDisc Player User Manual


 
13
Basic operation
12
Recording : continued
1 Press the REC button.
2 Begin playback on the stereo system con-
nected to this unit.
3 Press the REC LEVEL (
55
55
5 or
44
44
4) button
to adjust the recording level (analogue
connection only).
Adjust the recording level so that the maximum
sound volume from the source makes the read-
ing swing somewhere between –4 dB and 0 dB.
0dB
4dB
For digital connection, it is not necessary to ad-
just the recording level.
4 Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Here you can search for the track to record.
5 Press the
0606
0606
06 button.
6 Begin playback on the stereo system to
start recording.
To interrupt recording
Press the 06 button.
The track number will be increased by one each time
the recording is interrupted.
To stop recording
Press the • /:OFF button.
When recording stops, “TOC” appears. Whilst “TOC”
appears, recorded contents haven’t been written on
the MiniDisc.
To write recorded contents on the MiniDisc
Press the • /:OFF button whilst in the stop mode.
The power turns off after recorded contents have been
written on the MiniDisc.
Level meter indicator
TOC display