Sharp MD-MX30 MD Stereo System User Manual


 
28
To change disc names and track names
To add a character:
(Example: To change "BET" to "BEST")
1 To change disc names, perform steps 1 - 3 on page 26.
To change track names, perform steps 1 - 2 on page 27.
2 Press the
3 3
3 3
3 or
2 2
2 2
2 button to flash the character at
the place you want to add a letter.
DISC
To cancel the operation, press the MD button.
3 Select the character you want to add, using the jog
dial. Then, press the MEMORY/ENTER button.
DISC
DISC
The selected character will be added, and the original
characters will move to the right by one.
4 After entering all of the characters in the name, press
the NAME/TOC EDIT button.
Note:
You cannot modify disc or track names created on other
equipment if they are over 40 characters.
In this case, erase the name and then enter a new name.
To delete a character:
(Example: To change "BESUT" to "BEST")
1 To change disc names, perform steps 1 - 3 on page 26.
To change track names, perform steps 1 - 2 on page 27.
2 Press the
3 3
3 3
3 or
2 2
2 2
2 button to flash the character to
erase.
DISC
To cancel the operation, press the MD button.
3 Press the TIMER/DELETE button.
DISC
After this step, if you are not going to enter a character, go
to step 5.
4 Select the character you want to add, using the jog
dial. Then, press the MEMORY/ENTER button.
The selected character will be added, and the original
characters will move to the right by one.
5 After entering all of the characters in the name, press
the NAME/TOC EDIT button.
(Continued)
NAME/TOC EDIT
MEMORY/
ENTER
Jog dial
MD
32
TIMER/DELETE