Filter
Top Products
01/4/4 88UK_6.fm
47
References
-Error Messages-
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
NO SIGNAL
z
Poor connection of the digital cable.
z
No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
z
The input signal has improper sam-
pling frequency.
NOT PLAY
z
You tried to play back a track that
cannot be played with this equip-
ment.
PLAY MD
z
You recorded on a playback-only
disc.
POWER ?
z
Improper power is being supplied.
PROTECTED
z
The write protection tab of a Mi-
niDisc is set to the protected posi-
tion.
z
You tried to record on a playback-
only disc.
SORRY
z
Since a track number is currently
being located or updated, the unit
cannot accept your command.
(Wait for a whilst and try the operation
again.)
ERROR MES-
SAGES
MEANING
TEMP OVER
z
The temperature is too high.
(Turn off the power, and wait for a
whilst.)
TOC FORM
(**)
z
There is an error in the recording
signal.
(Erase all of the tracks, and then
record again.)
TOC FULL
z
There is no space left for recording
character information (track names,
disc names, etc.).
Tr. Protect
z
The track has been protected from
being erased.
(Edit the track with the device on which
it was recorded.)
? DISC
z
A disc which contains data other
than music was played.
(A disc which contains nonmusic data
cannot be played.)
z
There is an error in the signal re-
corded on the disc.
Web-site:
www.sharp.co.uk/support
Help Line:
08705 274277 (office hours)