Filter
Top Products
54
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
References
– Specifications –
Power source DC 1.2V: Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1
DC 5V: AC adaptor (AC 230 - 240V, 50/60 Hz)
DC 1.5V: Commercially available, “AA” size (LR6), alkaline battery x 1
DC 1.5V: Separately available car adaptor, AD-CA55X (for cars with a 12-24V DC nega-
tive earth electrical system)
Power consumption 7 W (AC adaptor)
Output power RMS; 10 mW (5 mW + 5 mW) (0.2% T.H.D.)
Charging time Approx. 3.5 hours
Battery life When using the rechargeable battery Continuous recording: Approx. 6.5 hours
(fully charged) included with the unit Continuous play: Approx. 12 hours
When using one, commercially available, high Continuous recording: Approx. 6 hours
capacity, “AA” size (LR6), alkaline battery (The Continuous play: Approx. 18 hours
rechargeable battery is in the unit, discharged)
When using one, commercially available, high Continuous recording: Approx.
15.5
hours
capacity, “AA” size (LR6), alkaline battery with Continuous play: Approx. 30 hours
the rechargeable battery (fully charged)
●
The continuous recording time is for analogue inputs when the volume level is set to “VOL 0”
(LCD edge light off).
● The continuous play time shows the value when the volume level is set to “VOL 15”
(LCD
edge light off)
.
● The above values are the standard values when the unit is charged and used at an
ambient temperature of 20°C (68°F).
● The operating time when using an alkaline battery may be different, depending on the
type and manufacturer of the battery, and on the operating temperature.
Specifications
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some devia-
tions from these values in individual units.