Filter
Top Products
17
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Inserting a MiniDisc
1 Slide the OPEN lever to release the com-
partment door.
2 Lift it up.
3 Insert a MiniDisc as shown.
4 Close the compartment door.
Notes:
● Do not place the MiniDisc under the holder.
● If any resistance is felt, do not force the MiniDisc into the
unit, as it may cause damage to the unit. If resistance is
felt, remove the MiniDisc and reload it.
● The lid can not be opened if “TOC” is displayed
refer to
the instruction on page 22.
Check that the erase-protection
tab is in the recordable position.
1
2
3
4
Preparation
– Inserting a MiniDisc –
Recordable Recording
prevented
When you record on a
MiniDisc, check that the
erase prevention tab is
set to the “recordable”
position.