Filter
Top Products
00/12/26 80UK_40_47.fm
46
References
-Specifications-
Specifications
„ General
Power source:
Battery life:
z
The continuous recording time is for analogue inputs
when the volume level is set to "VOL 0".
z
The continuous play time shows the value when the
volume level is set to "VOL 15".
z
The above values are the standard values when the
unit is charged and used at an ambient temperature of
25°C (77°F).
z
The operating time when using an alkaline battery
may be different, depending on the type and manufac-
turer of the battery, and on the operating temperature.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification chang-
es for product improvement without prior notice. The performance specification figures indicated are nominal values
of production units. There may be some deviations from these values in individual units.
DC 5V: AC adaptor (AC 230-240V, 50/60 Hz)
DC 1.5V: Commercially available, "AA" size
(LR6), alkaline battery x 1
DC 1.2V: Optional rechargeable Nickel-Metal
Hydride battery (AD-N70BT) x 1
DC 4.5V: Optional car adaptor, AD-CA20X(for
cars with a 12 - 24V DC negative earth
electrical system)
Power con-
sumption:
7 W (AC adaptor)
Output pow-
er:
RMS; 20 mW (10 mW + 10 mW)
(0.2% T.H.D.)
Charging
time:
Approx. 3.5 hours (90 %)
Approx. 5.5 hours (fully charged)
(When using the AC adaptor included
with the unit)
When using the optional
rechargeable battery (fully
charged)
When using a commercial-
ly available, high capacity,
"AA" size (LR6), alkaline
battery
Continuous recording: Ap-
prox. 7 hours
Continuous recording: Ap-
prox. 3 hours
Continuous play: Approx.
12 hours
Continuous play: Approx.
12 hours
Web-site:
www.sharp.co.uk/support
Help Line:
08705 274277 (office hours)