Sharp IM-DR410E CD Player User Manual


 
19
IM-DR410E
03/7/21 IM-DR410E_3.fmIM-DR410E TINSE0550AWZZ
Basic Operation
-Playback-
"
Volume control
The sound escaping from your earphones may annoy
people around you. In particularly crowded places (such
as on trains or buses), reduce the volume.
"
Bass control
Each time the BASS button is pressed, the bass
response will be switched as follows.
"
To customise low and high levels
You can set 3 types of bass settings (BASS 1 - BASS 3)
by adjusting low (Lo) and high (Hi) boost for each setting.
Emphasising low (Lo) and high (Hi) sound of BASS 3.
Notes:
!
If you set the volume to 23 or more, the bass boost will
be adjusted automatically.
!
When you make the setting of "To customise low and
high levels" with the volume level set to 23 or more,
the volume level will be reduced to 22 automatically.
Press the VOL + button to increase
the volume and the VOL - button to
decrease the volume.
Volume (0 - 30)
BASS 1 Emphasised slightly.
BASS 2 Emphasised more.
BASS 3 Emphasised fully.
BASS OFF Cancelled. (Default setting)
Default
BASS 3
Lo
Frequency
Sound
level
Hi
Lo5
Hi5
1
During playback, press the MENU/ENTER
button.
2
Press the or button repeatedly to se-
lect "SOUND ADJ" and then press the
MENU/ENTER button.
3
Press the or but-
ton repeatedly to select
bass setting, and the
VOL + or VOL - button to
select "B3".
4
After selecting "Lo" or
"Hi" with the or
button, press the VOL +
or VOL - button to adjust
the low or high sound
setting.
5
Press the MENU/ENTER button.
Repeat steps 1 - 5 to change the other bass setting.
B3
4
IM-DR410E TINSE0550AWZZ
4