Sharp IM-DR410E CD Player User Manual


 
17
IM-DR410E
03/7/21 IM-DR410E_3.fmIM-DR410E TINSE0550AWZZ
Basic Operation
-Recording-
Notes:
!
Complete the operation within 7 seconds whilst select-
ing the menus.
!
Changing the volume level whilst recording does not
affect the recording.
!
You cannot adjust the bass level whilst recording.
!
Whilst "TOC" is displayed, the MiniDisc recorded con-
tents are not yet updated.
To interrupt recording
Press the button.
!
To resume recording, press the button again.
!
The track number will be increased by one each time
the recording is interrupted.
To stop recording
Press the :OFF/HOLD button.
When recording is stopped, TOC is written on the MD.
The "TOC" indicator disappears.
5
Press the MENU/ENTER button.
6
Press the or button repeatedly to se-
lect "REC MODE".
7
Press the MENU/ENTER button.
8
Press the or button repeatedly to se-
lect the recording mode (page 22).
9
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
10
Press the button to start the MiniDisc
unit recording.
11
Begin playback on the stereo system, the
output will be recorded.
SP
(2 times long recording)
(4 times long recording)
(Monaural recording)
(Stereo recording)
TOC display
4