Sharp HT-SL75 Speaker User Manual


 
9
1
7
6
5
4
3
2
1
9
HT-SL70 / HT-SL75
E-5
2011 October 7
Use the unit on a firm, level surface free from vibration.
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers, fax
machines, etc.) which generate electrical noise.
Do not place anything on top of the system.
Do not expose the unit to moisture, to temperatures
higher than 140°F (60°C) or to extremely low
temperatures.
If your system does not work properly, disconnect the
AC power cord from the AC outlet and replug.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it
from the AC outlet, as pulling the cord can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
This unit should only be used within the range of
41°F - 95°F (5°C - 35°C).
Warnings:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may
result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No object filled with
liquids, such as vases shall be placed on the apparatus.
Precautions
Please ensure that the equipment is positioned in a
well-ventilated area and ensure that there is at least
4" (10 cm) of free space along the sides, top and
back of the equipment.
General
ACTIVE SUBWOOFER SYSTEM
HT-SL70
4" (10 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)