Sharp HTSB600 Speaker System User Manual


 
9
8
7
6
5
4
3
2
1
9
E-12
2011 January 27
HT-SB600
Use an outdoor FM antenna if you require better reception.
Consult your dealer.
Note:
When an outdoor FM antenna is used, disconnect the
supplied FM antenna wire.
The illustration below shows the flows of the signals.
Notes:
This unit supports HDMI which enables ARC (Audio
Return Channel) function.
To enable ARC function make sure to use High Speed
HDMI cable.
This structure also needs TV that supports ARC
function.
To listen to the sound from non-ARC-compatible TV,
connect the digital output from TV to this system digital
input terminal. (refer page 13)
This unit can be operated (power on/off, volume up/
down or switch input source) via a TV or similar
component which supports HDMI CEC (Consumer
Electronics Control) function. If this does not work, it
does not mean this system is faulty. Refer to the
operation manual of the respective component on how
to activate the CEC function. Example: Go to the Menu
of the component to search and turn on the CEC
function. Different brands may have different naming for
the CEC function. For Sharp LCD TV, it is named as
AQUOS LINK.
To watch 3D images, connect 3D-compatible TV and
video component (Blu-ray Disc player, etc.) to this
system.
Make sure to use High Speed HDMI cables and put on
the 3D glasses, otherwise 3D images may not be
viewed properly.
System connections (continued)
Supplied FM antenna:
Connect the FM antenna wire to the FM
75 OHMS jack and position the FM
antenna wire in the direction where the
strongest signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM
and GND (Ground) terminals. Position the
AM loop antenna for optimum reception.
Place the AM loop on a shelf, etc., or
attach it to a stand or a wall with screws
(not supplied).
Installing the AM loop antenna:
Note:
Placing the antenna on the unit or near the AC power cord
may cause noise pickup.
Place the antenna away from the unit for better reception.
Caution:
Turn off all other equipment before making this connection.
Antenna connection
FM
antenna
<Assembling>
<Attaching to the wall>
Screws (not supplied)
Wall
Outdoor FM antenna
75 ohms
coaxial cable
Outdoor
FM
antenna
HDMI Connection
DVD/Blu-ray
Game console
Digital tuner
TV
Audio and Video signal
HDMI cables are not supplied
To select HDMI 1, 2, 3 or TV ARC function:
On main unit: Press INPUT button repeatedly until
“HDMI1”, “HDMI2”, “HDMI3” or “TV
ARC” appears on the display.
On remote
control:
Press HDMI1, HDMI2, HDMI3 or TV
ARC button.
TV
DVD, Blu-ray
disc player or
similar
To HDMI output
terminal
To HDMI (ARC) input
terminal
To HDMI input
terminal
To HDMI
output
terminal