Sharp HTSB600 Speaker System User Manual


 
9
1
7
6
5
4
3
2
1
9
2011 January 27
HT-SB600
E-11
Caution
Make sure to unplug the AC power cord before making any connections.
System connections
FRONT
SPEAKERS
CENTER
SUB
WOOFER
INPUT
+
Main unit
Subwoofer
Purple
Red
Sound Bar
Green
White
FM antenna
AC outlet
AC 120 - 60 Hz
AM loop
antenna
Connect the wire without insulation tube to the minus (-)
terminal, and the wire with colored insulation tube to the
plus (+) terminal. Make sure to match the colored
insulation tube with terminal color before connection.
Speaker and Subwoofer connection
INPUT
INPUT
+
+
Purple
Never mistake the FRONT, CENTER and the
SUBWOOFER terminals. The main unit or the
speakers may be damaged.
If you use other speakers with an impedance lower than
that specified, the main unit may be damaged. Front
speakers: 4 ohms, Subwoofer: 4 ohms.
Do not make a mistake when
connecting the right and the left
speakers. The right speaker is
the one on the right side when
you face the unit.
Do not let the bare speaker
wires touch each other.
Do not allow any objects to fall
into or to be placed in the bass
reflex duct.
Do not stand or sit on the subwoofer/speakers. You may
be injured.
FRONT
R
L
SPEAKERS
CENTER
SUB
WOOFER
INCORRECT