Filter
Top Products
6
CD-G10000
CP-G10000S
General Information
Precautions
General
z
Please ensure that the system is positioned in a well-ventilated
area and ensure that there is at least 4" (10 cm) of free space
along the sides, top and back of the unit.
z Do not place anything on top of the unit and subwoofer.
z Do not expose the system to moisture, to temperatures higher
than 140°F (60°C) or to extremely low temperatures.
z If your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and
then turn on your system.
z
This system should only be used within the range of 41°F - 95°F
(5°C - 35°C).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of acci-
dent causing damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage other than that
which is specified.
Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid
exposure to high volume levels, which occurs while turning the unit
on with the volume control setting up high, or while continually lis-
tening at high volumes.
z
Do not place active subwoofer system on
the same surface as main unit to prevent
sound interruption during playback.
z Use the unit on a firm, level surface free from
vibration.
z Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
4" (10 cm)
4" (10 cm) 4" (10 cm)
4" (10 cm)
Floor
z
In case of an electrical storm, unplug the
system for safety.
z
Hold the AC power plug by the head when
removing it from the AC outlet, as pulling
the cord can damage internal wires.
z
Do not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.