Filter
Top Products
03/12/19 CD-MPS660E(A)1.fm
9
CD-MPS660E
TINSZA040AWZZ
Preparation for Use
! Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Installing the AM loop aerial:
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
! Placing the speaker system
The left and right speakers have individual shapes. For best perfor-
mance, place the speakers according to the diagram below.
Note:
The speaker grilles are not removable.
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
"
Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
"
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
"
Do not let the bare speaker wires touch
each other.
"
Do not stand or sit on the speakers. You may
be injured.
Incorrect
Left speaker Right speaker
Black
Red
2