30
CD-DP900E(UK)_3.fm02/1/9
CD-DP900E
References
- Maintenance / Specifications -
Maintenance
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean
these parts with a cotton swab moistened with commercial head/pinch roller
cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which contains high
voltages.
After long use, the deck's heads and capstans may become magnetised, causing
poor sound. Demagnetise these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetiser. Read the demagnetiser's
instructions carefully before use.
Cleaning the cabinet
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Amplifier
Playback head Erase head
Capstan Recording/Playback head
Pinch roller
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
TAPE 1
TAPE 2
A
C
B
C
D
E
B
Power source
AC 230-240 V, 50 Hz
Power consumption
116 W
Dimensions
Width: 270 mm (10-5/8")
Height: 330 mm (13")
Depth: 355 mm (13-15/16")
Weight
7.2 kg (15.9 lbs.)
Output power
Front speakers:
RMS: 80 W (40 W + 40 W) (10 % T.H.D.)
RMS: 64 W (32 W + 32 W) (0.9 % T.H.D.)
Centre speaker:
RMS: 20 W (10 % T.H.D.)
RMS: 16 W (0.9 % T.H.D.)
Surround speakers:
RMS: 20 W (10 W + 10 W) (10 % T.H.D.)
RMS: 16 W (8 W + 8 W) (0.9 % T.H.D.)
Output terminals
Front speakers: 6 ohms
Centre speaker: 6 ohms
Surround speakers: 12 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 kohms