Filter
Top Products
E-12
Timer and sleep operation (Remote control only) (continued)
1 minute or more
Once timerDaily timer
Start Stop Start Stop
Timer playback Q
Before setting timer:
Check that the clock is set to the correct time. If it is 1
not set, you cannot use the timer function.
For timer playback: Plug in USB, dock iPod/iPhone, 2
load discs or tape to be played.
Press the ON/STAND-BY button to turn the power on.1
Press and hold the CLOCK/TIMER button.2
Within 10 seconds, press the 3 or button
to select “ONCE” or “DAILY”, and press the MEMORY
button. Set the clock to the correct time if “ONCE” or
“DAILY” does not appear.
Within 10 seconds, press the
4 or button to select
“ONCE SET” or “DAILY SET”, and press the MEMORY
button.
To adjust the hour, press the
5 or button and then
press the MEMORY button.
To adjust the minutes, press the
6 or button and
then press the MEMORY button.
Set the time to fi nish as in steps 5 and 6 above.
7
To select the timer playback source (CD, TUNER, USB, 8
iPhone/iPod, TAPE or AUDIO IN), press the or
button. Press the MEMORY button.
When you select the tuner, select a station by pressing
the
or button, and then press the MEMORY
button. If a station has not been programmed, “NO
PRESET” will be displayed and timer setting will be
canceled.
Adjust the volume using the VOLUME control, and then
9
press the MEMORY button. Do not turn the volume up
too high.
Press the ON/STAND-BY button to enter the power
10
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
1
2
3
4
5
4
5
3
2
1
MINI COMPONENT SYSTEM
OPEN / CLOSE
TUNING
PRESET
USB
AUDIO IN
TAPE
TUNER
CD
TIMER
iPod/iPhone
POWER
ON/ STAND-BY
(BAND)
VOL.
VOL.
REMOTE
SENSOR
CD-DH950P
When the preset time is reached, playback will start. 11
The volume will increase gradually until it reaches the
preset volume. The “” or “DAILY” indicator will blink
during timer playback.
When the timer end time is reached, the system will
12
enter the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer operates at the same time every day. It
will continue until the daily timer setting is canceled.
Cancel the daily timer when it is not in use.
Notes:
When performing timer playback using another unit O
connected to the USB terminal or AUDIO IN jack,
select “USB” or “AUDIO IN” in step 8.
This unit will turn on or enter the power stand-by mode O
automatically. However, the connected unit will not
turn on or off. To stop the timer playback, follow step
“Canceling the timer setting” of this page.
Checking the timer setting:
Turn the power on and press and hold down the
1
CLOCK/TIMER button.
Within 10 seconds, press the 2 or button to select
“ONCE” or “DAILY”, and press the MEMORY button.
Within 10 seconds, press the 3 or button to
select “ONCE CALL” or “DAILY CALL”, and press the
MEMORY button.
Canceling the timer setting:
Turn the power on and press and hold down the
1
CLOCK/TIMER button.
Within 10 seconds, press the 2 or button to select
“ONCE” or “DAILY”, and press the MEMORY button.
Within 10 seconds, press the 3 or button to select
“ONCE OFF” or “DAILY OFF”, and press the MEMORY
button. Timer will be canceled (the setting will not be
canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
Turn the power on and press and hold down the
1
CLOCK/TIMER button.
Within 10 seconds, press the 2 or button to select
“ONCE” or “DAILY”, and press the MEMORY button.
Within 10 seconds, press the 3 or button to select
“ONCE ON” or “DAILY ON”, and press the MEMORY
button.
Press the ON/STAND-BY button to enter the power 4
stand-by mode.
Sleep operation Q
The iPod, Audio In, radio, CD, MP3/WMA disc, USB and
cassette tape can all be turned off automatically.
Play back the desired sound source.
1
Press the SLEEP button.2
Within 10 seconds, press the SLEEP button repeatedly 3
to select the time and then press the MEMORY
button.
10
20 30 ....... 80 90
“SLEEP” will appear.
4
The unit will enter the power stand-by mode 5
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation fi nishes.
To confi rm the remaining sleep time:
While “SLEEP” is indicated, press the SLEEP button.
1
To cancel the sleep operation:
Press the ON/STAND-BY button while “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
While “SLEEP” is indicated, press the SLEEP button.
1
Within 10 seconds, press the SLEEP button repeatedly 2
to select “SLEEP OFF” and then press the MEMORY
button.
CD-DH950P_US_EN.indd 12CD-DH950P_US_EN.indd 12 2/21/2011 12:13:25 PM2/21/2011 12:13:25 PM