Sharp CD-CH1500 Stereo System User Manual


 
25
Continued to the next page
Advanced Features
– Timer and Sleep Operation –
Timer playback or Timer recording
Before setting the timer:
While the power is in the stand-by mode, press the DISPLAY button
on the remote control to check that the clock is on time.
1 Press the POWER button to turn the power on.
2 Press the MENU button.
3 Turn the jog dial to select “TIMER PLAY” or “TIMER REC” mode
and within 10 seconds, press the ENTER button.
For timer playback: For timer recording:
4 PLAY” or “ REC” will flash for 5 seconds.
Press the ENTER button during the flash.
or
5 Turn the jog dial to specify the hour to start and within 10 sec-
onds, press the ENTER button.
The illustrations show the timer playback setting.
Timer and Sleep Operation
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at the
preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
Sleep operation:
The radio, compact disc and cassette tape can all be turned off automatically.
Setting the Clock (See page 15.)