Filter
Top Products
20
Radio
– Listening to the Radio –
Listening to the Radio
1 Press the POWER button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3 Press the TUNING (
XX
XX
X or
WW
WW
W) button to tune in to the desired sta-
tion.
Manual tuning:
Press the TUNING
(X or W)
button as many times as required to tune in to the
desired station.
Auto tuning:
When the TUNING (X or W) button is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will stop at the first receivable
broadcast station.
Notes:
● When radio interference occurs, auto scan tuning may stop automatically at
that point.
●
Auto scan tuning will skip weak signal stations.
● To stop the auto tuning, press the TUNING (X or W) button again.
To receive an FM stereo transmission:
Press the ST-MODE button on the remote control to display the “ST” indicator.
● “j” will appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the ST-MODE button. The “ST” indicator goes
out. The reception changes to monaural, and the sound becomes clearer.
After use:
Press the POWER button to enter the power stand-by mode.
FM stereo mode indicator
FM stereo receiving indicator
■ Sound Control (See page 14.)