<P=005>
(Continued)
■ Demo mode
When the AC power cord is first connected, the unit will enter
the demonstration mode.
To cancel the demonstration mode:
When the unit is in the stand-by mode (demonstration mode),
press the X-BASS/DEMO button.
● The demonstration mode will be cancelled and the unit will be
in the low power consumption mode.
To return to the demonstration mode:
When the unit is in the stand-by mode, press the X-BASS/DEMO
button again.
Note:
● When the unit is in the low power consumption mode, the
display will disappear.
● When the power is on, the X-BASS/DEMO button can be used
to select the extra bass mode.
■ To change the brightness of the display
Press the DIMMER button.
● The display will be made dimmer.
To return to the original brightness:
Press the DIMMER button again.
■ Remote control
● When inserting or removing the batteries, push them toward
the battery terminals.
● Installing the batteries incorrectly may cause the unit to mal-
function.
Precautions for battery use:
● Insert the batteries according to the direction indicated in the
battery compartment.
● Replace all old batteries with new ones at the same time.
● Do not mix old and new batteries.
● Remove the batteries if they are weak or if the unit will not be
used for long periods of time. This will prevent potential
damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Notes concerning use:
● Replace the batteries if the operating distance is reduced or if
the operation becomes erratic.
● Periodically clean the transmitter LED on the remote control
and the sensor on the main unit with a soft cloth.
● Exposing the sensor on the main unit to strong light may in-
terfere with operation. Change the lighting or the direction of
the unit.
● Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
(Main unit operation)
(Main unit operation)
15
15
When bright
When dark
● 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or
similar)
● Batteries are not included.
8" - 20’
(0.2 m - 6 m)
CD-BA200(SEC) TINSE0276AWZZ
5