Filter
Top Products
T3 Rack Mount Kit Installation Instructions
SHP900096-000 04/13/05 Rev 2 Page 4 of 5
8. Remove the feet from the bottom of the
StorEdge T3 array.
9. Install the left mounting chassis on the bottom
left side of the T3 array and secure with two
10-32 x 1/4-inch flat head screws.
10. Install the right mounting chassis on the bottom
right side of the T3 array and secure with two
10-32 x 1/4-inch flat head screws.
11. Install the T3 array in the rack enclosure.
• Approach the rack enclosure with the rear of
the array facing the rack enclosure.
• Make sure that the array is resting on top of
the mounting flange on the left front mounting
bracket.
• Slide the array all the way into the rack
enclosure until it stops.
12. Secure the T3 array in the rack enclosure by
tightening the two thumbscrews on the left and
right chassis mounts.
Step Detail