Filter
Top Products
12
Putting the SR 2020 D into operation
Mounting only one
SR 2020 D
When mounting only one transmitter into the rack, use the
blanking plate Ƹ instead of the second transmitter.
̈ Hook the two rack mount “ears” ƹ to the front panel of the
transmitter.
̈ Secure the rack mount “ears” ƹ to the transmitter using two
of the supplied recessed head screws (M 3x6) respectively.
̈ Secure the blanking plate Ƹ to one of the rack mount
“ears” ƹ using two of the supplied recessed head screws
(M 6x10).
̈ If you are not front mounting the BNC output connector,
insert the two blanking plugs ƻ into the holes of the
blanking plate.
̈ Slide the transmitter into the 19” rack.
̈ Secure the rack mount “ears” ƹ to the rack.
Connecting the transmitter to the mains
̈ Pass the cable through the cable grip ¶.
̈ Connect the cable of the mains unit to the DC IN socket º of
the transmitter.
̈ Plug the mains connector into the wall socket.
Connecting external devices
You can connect either a microphone (Mic) or an external audio
source (Line, e.g. CD or MP3 player) to the transmitter.
To do so, use a suitable audio cable with a length of up to 3 m.
Ƹ
ƹ
ƹ
ƻ
2
¶º