Filter
Top Products
18
Using the Set 840 S system
̈ Press the channel search button 6 on the receiver to
re-start the channel search.
If reception is still subject to interference:
̈ Read the chapter “If a problem occurs ...” on page 26.
Adjusting the balance
Switching between mono and stereo operation
If, despite a correct balance adjustment, you can hear the
sound only with one ear:
̈ Change, if necessary several
times, the position of the
channel selector switch H on
the transmitter to change to
an interference-free channel.
You can choose between 3
channels.
The balance control allows for right/left
volume adjustment. Adjust the balance
so that you hear equally well with both
ears.
̈ Turn the balance control 4 to the
left L or right R in order to increase
the volume for the corresponding
ear.
̈ Set the ST/MO switch F
on the transmitter to MO
(mono).
H
4
F