Sennheiser RS 185 Headphones User Manual


 
Cleaning and maintaining the RS 185
RS 185 | 27
Cleaning and maintaining the RS 185
To clean the wireless headphone system:
̈ Switch your wireless headphone system off and disconnect
the trans-
mitter from the AC wall outlet before cleaning.
̈ Clean the product only with a soft, dry cloth.
Replacing the ear pads
For reasons of hygiene, you should replace the ear pads from time to time.
Spare ear pads are available at your local Sennheiser partner.
1 Lightly twist the ear pads counterclockwise until you overcome a slight
resistance.
2 Lift the ear pads off the ear cups and dispose of them properly.
3 Hook the new ear pads onto the ear cups. Observe the L (left) and
R (right) markings on the rear of the ear pads.
4 Twist the ear pads clockwise until you
hear a click sound. Ensure that
they are locked firmly onto the ear cups.
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit and
damage the electronics.
̈ Keep all liquids away from the product.
̈ Do not use any cleansing agents or solvents.
1
2
3
4