Filter
Top Products
Using your RS 185 headphone system
24 | RS 185
Usin
g the Manual Level Control (MLC) mode
Follow these steps to adjust the signal of your
analog audio input.
1 Press the LEVEL button on the headphones or on th
e transmitter until
the Manual Level Control (MLC) mode becomes active.
The MLC LED indicator lights up green. If
the audio level from your
source is too high and exceeds the maximum permitted level, the sound
gets distorted and the MLC LED indicator changes to red.
2 Use the MLC rotary knob to manually adjust the audio level. If the
maximum p
erm
itted level is exceeded, turn the knob counterclockwise
and position it to the point just before where the MLC LED indicator
changes to
red. This point means that you have reached the optimum
setting for the audio level.
WARNING
Danger due to high volume levels
Before putting on the headphones and before toggling between
the level modes, adjust the volume on the headphones to a low
level. Toggling between different modes may cause an enormous
volume jump that can possibly damage your hearing.
1 2
MLC
ALC
LEVEL
LEVEL
OR
ML
C
AL
C
LEVEL
M
LC
MAX
MIN
MIN MAX
MLC
MLC ON
ALC
LEVEL
MLC