Sennheiser RS 180 Headphones User Manual


 
19
Using the RS 180
Using the RS 180
To switch the product on and to listen to your sound source, proceed as
follows:
Switching the transmitter on and off
Switching the transmitter on
̈ Press the multi-function button for approx. 1 second.
The transmitter switches on. The multi-function button flashes
green, indicating that the transmitter is in enrollment mode.
Once the transmitter has found suitable headphones, it pairs with the
headphones and transmits an audio signal. The multi-function LED µ
of the headphones and the multi-function button of the
transmitter flash slowly.
Sequence of steps Page
1. Make sure that the rechargeable batteries are charged. 17
2. Switch your sound source on.
3. Switch your transmitter on. 19
4. Switch your headphones on. 21
5. Adjust the desired volume. 22
1s
5s
3
µ