Sennheiser RS 180 Headphones User Manual


 
15
Putting the RS 180 into operation
Integrating the transmitter into an existing connection between devices
To integrate the transmitter into an existing connection between your
sound source and an additional device (e.g. an amplifier):
̈ Check if the RCA cable of the additional device is connected to an input
(see the instruction manual of the device).
̈ Connect the RCA cable of the additional device to the RCA output of
the transmitter.
The transmitter must remain connected to the mains. Otherwise,
the connection between your sound source and the additional
device will be interrupted.
5