Filter
Top Products
32
32
Specifications
Overall unit
Receiver slots for up to four EK 3041 receivers: at the front, fastened with four M2 screws respectively,
without additional adapter
RF connection: via special angled plug
Antenna inputs: 2 x BNC at the rear
Antenna output
(for supplying two Quadpacks with the signals of two
antennas):
1 x BNC at the rear
Operating switch for overall unit (incl. receivers): rocker switch at the rear
Operation indicator for overall unit: red LED at the front
Operation indicator for receiver modules: 4 x LED at the front
Connector for external DC power supply: 4-pin XLR, male
Audio outputs: 3-pin XLR, male
Monitor output:
1/4
" (6.35 mm) jack socket
Selection of monitor receiver: via 4 “push-push” keys
Indication of selected monitor receiver: color of operation indicator for receiver module chan-
ges from red to green
Selector switch for mic / line level : slide switch at the rear
Level control for mic / line level : potentiometer at the rear
Wideband input module can be exchanged
for a selective input module:
2 input modules at the rear
Supply voltage range:
10.5
–18 V
DC
, 12 V
DC nominal
Current consumption with 4 receivers, peak deviation,
headphone output at nominal load:
490 mA/12 V
DC
Supply voltage for antenna boosters:
2 x 10.5
–18 V, 50 mA nominal
Fuse: 1 AT
Temperature range:
–10 ... +55° C
Dimensions:
approx. 214 x 230 x 85 mm (1/2 19
", 2 U)
Weight incl. receivers: 3,520 g
Wideband input module
Frequency range:
0
–900 MHz
! "