Filter
Top Products
1514
350°
HMEC 25-6A HMEC 25-KAP-2
Cable (Worn on left or right side)
Cable on the left
Cable on the right
̈ NoiseGard
™
reduces noise and increases comfort.
̈ NoiseGard
™
is not a medical noise protection system!
̈ NoiseGard
™
cannot replace an industrial ear defender system for use in noisy
environments!
Volume up? - No !
When people use headphones, they tend to choose a higher volume than with
loudspeakers. Listening with high volume levels for a longer time can lead to
permanent hearing defects. Because the NoiseGard
™
circuitry is reducing the
ambient noise, the headphones can be set at a correspondingly lower level leading
to more comfortable hearing conditions so protecting your hearing.
Turning NoiseGard
™
ON/OFF
With the NoiseGard
™
active noise compensation turned off, the headset can be
used as a conventional headset.
Turn on the NoiseGard
™
active noise compensation by setting the ON/OFF switch
to ON.
Mono/Stereo selection
In general, you’ll receive a mono sound source so that the Mono/Stereo switch can
remain set to ‘Mono’. When using a stereo intercom system, set the Mono/Stereo
switch to ‘Stereo’.
Note: