Filter
Top Products
3
Putting the headset into operation
Connecting the headset
Connect the 1/4“ (6.35 mm) stereo jack plug (PJ 055) for
the headphones and the
PJ 068 jack plug (5.25 mm) for
the
microphone to the corresponding jack sockets of your
intercom.
Wearing the headset
The letters refer to the diagrams on the cover page.
B Adjust the length of the headband to fit your head size
or shape. The earpads should exert a slight pressure on
the ears.
C Holding the headset with two hands, carefully bend the
headband to adjust it to a snug but comfortable fit.
D Put the headset on.
E Turn the microphone boom towards the mouth.
F Bend the flexible microphone boom ᕢ so that the
microphone ᕤ is placed at the corner of the mouth.
Maintain a distance of approx. 1 cm between micro-
phone and mouth.
G Affix the headset cable to the clothing by means of the
supplied cable clip. Attach the cable clip so that you can
move your head freely.
HME43-K_515687_1107.book Seite 3 Mittwoch, 20. Februar 2008 10:23 10