Filter
Top Products
5
Putting the system into operation
Setting up the transmitter
̈ Place the transmitter so that there are no obstacles in the
light path between transmitter and receiver.
Note:
Avoid exposure to direct sunlight. Direct sunlight may
interfere with the reception and may damage the
transmitter.
If you use a plasma TV screen, please observe the following to
ensure interference-free reception:
y Make sure that the transmitter’s infrared light beam is
pointed directly at the receiver and that the light path
between transmitter and receiver is not obstructed.
y If necessary, use a standard extension cable (3.5 mm stereo
jack plug) to reduce the distance between transmitter and
receiver. This extension cable is available from your
Sennheiser dealer.