Sennheiser 250 Headphones User Manual


 
9
Preparing the headset for use
Inserting the batteries
Insert the batteries into the battery compartments on the
left and right earcups as follows:
̈ Open the battery compartment ² by pushing the catch
and open the cover.
̈ Insert the AAA size battery as shown in the diagram on
the left. Please observe correct polarity when inserting
the battery.
̈ Close the battery compartment ². The battery compart-
ment cover locks into place with an audible click.
Connecting the headset
The headset’s operating control features two cables with
one jack plug each.
̈ Connect the headset to the corresponding sockets of your
intercom.
²
Connector for connection to the
¼” (6.35 mm) jack plug headphone output
5.25 mm jack plug microphone input
HMEC250_516578_0507_SP6.book Seite 9 Mittwoch, 13. Juni 2007 3:18 15