Filter
Top Products
MANIPULATION
FUNCTION
DISPLAY
(RX)
32EM 203, Publ. 10/94 engl
Remote monitoring of 4.1.7
transmitter battery
Y
N
SET
ESC
MENU
AB
DIVERSITY
Choose the option to indicate the condition of
the transmitter battery (see ch. 4.1.1).
Depress
to select the display mode for the indication of
the battery condition.
NOTA BENE
This function is only operative if SK 50 UHF,
SK 250 UHF or SKM 5000 UHF transmitters
are used.
Depress
to return to the previous level.
This key also serves to stop data entry in case
of errors.
The EM 1046 RX receiver module
distinguishes between two types of power
supply: the transmitters can be powered by
batteries or rechargeable batteries.
If primary cells are used, the display indicates
the remaining capacity in three steps. A 5-step
display is used for rechargeable batteries.
ESC
SET
If you connect transmitters other than SK 50
UHF, SK 250 UHF or SKM 5000 UHF, the
display indicates
CONDITION OF PRIMARY CELLS:
Capacity of 100 %
Capacity of about 70 %
Capacity of about 30 %, the display starts
blinking.
Attention !
Replace the transmitter batteries.
The remaining capacity only suffices for
about half an hour!