Filter
Top Products
MANIPULATION
FUNCTION
DISPLAY
(RX)
31EM 203, Publ. 10/94 engl
System configurations 4.1.7
and identification data
Y
N
SET
ESC
MENU
AB
DIVERSITY
The receiver specifications are stored in every
single module:
The display indicates the
MODEL/SERIES
• EM 1046-U-L
UHF ( 450 - 790 MHz)
• EM 1046-U-H
UHF ( 630 - 960 MHz)
SERIAL NUMBER OF THE MODULE
Every module has a serial number to facilitate
its identification. The serial number cannot be
changed.
FREQUENCY RANGE OF THE MODULE
The display shows the standard frequencies or
frequency ranges.
SOFTWARE VERSION
Shows the version of the software used.
HARDWARE VERSION OF THE MODULE
1 Version of the analog section
(information for Sennheiser's Service
Department or Sennheiser distributors)
2 Version of the digital section
(information for Sennheiser's Service
Department or Sennheiser distributors)
CUSTOMER-SPECIFIC TEXT
It is entered by Sennheiser electronic KG or
your Sennheiser distributor, if ordered.
NOTA BENE
Depress
to return to the previous level.
This key also serves to stop data entry in case
of errors.
Choose the option to set the display (ch. 4.1.1).
Depress
to return to the display mode.
Use
or
to select the parameter to be indicated.
Scrolling is stopped by keeping
depressed.
SET
Y
N
SET
ESC