Filter
Top Products
MANIPULATION
FUNCTION
DISPLAY
(RX)
20EM 203, Publ. 10/94 engl
Receiver frequencies 4.1.2
Y
N
SET
ESC
MENU
AB
DIVERSITY
SET
24 MHz maximal
24 MHz maximal
24 MHz maximal
Chose option "RX-Freq." (chapter 4.1.1).
Depress
to allow the receiver frequencies to be selected.
The "M" on the display starts blinking.
The EM 1046 RX receiver module can be configured as follows:
• operation on max. 32 switchable frequencies or
• variable adjustment of receiver frequencies (5 kHz grid) within
16 frequency ranges
The frequencies or frequency ranges selected must fall within the
system's 24 MHz window. The configuration selected is stored in the
EM 1046 RX receiver module by a personal computer via the service
interface or by the remote computer. The configuration can be changed
as often as desired.
Refer changes to the system configuration to your authorized
Sennheiser distributor.
Example 1:
Variable adjustment within one frequency range (in the present case the
total bandwidth of the system.
Example 2:
Variable adjustment within three frequency ranges. The frequencies
between two adjacent frequency ranges cannot be used.
Example 3:
Seven selectable frequencies. The EM 1046 RX receiver modules come
with this standard setting.