Sennheiser EM 2050 Stereo Receiver User Manual


 
Using the operating menu
18
Display Function of the menu item Page
Main menu “Menu”
Squelch Adjusts the squelch threshold 22
Easy Setup Scans for unused frequency presets, releases and selects frequency presets 23
Frequency Preset Sets the frequency bank and the channel 24
Name Enters a freely selectable name 24
AF Out Adjusts the audio output level 25
Equalizer Changes the frequency response of the output signal 25
Auto Lock Activates/deactivates the automatic lock mode 25
Advanced Calls up the extended menu “Advanced Menu 25
Exit Exits the operating menu and returns to the current standard display -
“Easy Setup”
Reset List Releases all locked frequency presets
23Current List Selects an unused frequency preset
Scan New List Scans for unused receiving frequencies (frequency preset scan)
Exit Exits “Easy Setup” and returns to the main menu -
Extended menu “Advanced Menu”
Tune Sets the receiving frequencies for the frequency banks “U1” to “U6 26
Sets the frequency bank, the channel and the receiving frequency
(frequency banks “U1” to “U6”)
26
Guitar Tuner Selects the mode of the guitar tuner function 27
Sync Settings Calls up the “Sync Settings” submenu:
Adjusts the parameters to be transferred to the transmitters and activates/
deactivates the transfer (see below)
27
Pilot Tone Activates/deactivates the pilot tone evaluation 27
Warnings Calls up “Warnings 30
LCD Contrast Adjusts the contrast of the display panel 28
Reset Resets the settings made in the operating menu 28
IP-Address Adjusts the IP address of the receiver 28
Software Revision Displays the current software revision 29
Exit Exits the extended menu “Advanced Menu” and returns to the main menu -
“Sync Settings” submenu
SK Settings Adjusts the parameters to be transferred to SK transmitters and activates/deactivates
the transfer
29
SKM Settings Adjusts the parameters to be transferred to SKM radio microphone and activates/
deactivates the transfer
SKP Settings Adjusts the parameters to be transferred to SKP plug-on transmitter and activates/
deactivates the transfer
Exit Exits the “Sync Settings” submenu and returns to the extended menu
Advanced Menu