Filter
Top Products
Putting the receiver into operation
13
Connecting the mains cable
̈ Pass the mains cable through the cable grip µ.
̈ Connect the mains cable to the mains socket¾.
̈ Plug the mains plug into the wall socket.
The STANDBY button º is backlit in red.
CAUTION! Damage due to electric current!
If you connect the receiver to an unsuitable power supply, this can cause damage to the
device.
̈ Use the supplied mains cable to connect the receiver to the mains (100 to 240 V AC, 50 or
60 Hz).
̈ Ensure a reliable mains ground connection of the receiver – especially when you are using
multi-outlet power strips or extension cables.
50/60Hz 0.25A
100 - 240V
¾
µ