Sennheiser EM 2050 Stereo Receiver User Manual


 
If a problem occurs ...
36
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions,
please contact your local Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at www.sennheiser.com under “Service & Support”.
None of the diversity
displays I or II appears on
the display panel
Receiver’s squelch threshold is adjusted too
high
Reduce the squelch threshold (see page 17).
Transmitter’s RF signal is too weak Increase the transmission power of the
transmitter.
Reduce the distance between transmitter
and receiving antennas.
During the soundcheck,
only one diversity display
(I or II) appears on the
display panel
One of the antennas is not correctly
connected
Check the antenna cables or the antennas.
Antennas are not optimally positioned Reposition the antennas.
Problem Possible cause Possible solution